Skip to main content

Posts

Showing posts from September, 2015

Inventions to Make Cardboard Construction Easier

I have come across two products that would make cardboard/recyclable construction creations (especially for younger kids) much easier without all that scotch tape, staples, and box cutters. Strawbees Strawbees securely connect to straws to allow them to move and build crazy contraptions. After watching the video, I was sold. The opportunities are endless: bridges, masks, even a lantern fish that actually works! They come in sets ranging from $20-$80 through their store with a $15 standard flat rate shipping. I bought the $40 box which includes 368 connector pieces.  Could I have printed out my own on a 3D printer? Possibly. I'll have to see when the kit comes in. We have LOTS of straws at the library that I discovered after cleaning the craft closet.  They could be left out on a makerspace cart for students to explore on their own time or built into an already designed program. This will be used in our Tinkering Tuesday STEM programs as well as our drop in building program

3D scan and print yourself

Posted by our talented Simmons Graduate School intern, Tyler Kenney: 3D scanning has come to the library, and with it the ability to 3D print yourself.  By using an Xbox 360 Kinect and simply spinning in a chair, you can scan and print a bust of yourself. To get started, make sure the Kinect is plugged in (into the computer and into the wall) and launch Skanect, which should be located on the iMac's desktop.  With Skanect launched just click 'new' (the default settings will work fine), and then 'start' - shown below: After clicking 'start' it will bring you to this screen: Now is when you want to correctly position yourself.  The white box outline shows the area that will be recorded.  Grab the mouse (you will need it later) and position yourself accordingly.  With the mouse on your lap, click the record button (the red button with a black center).  Once it starts recording, stay as still as possible and slowly rotate the chair with

Using Tinkerplay app for 3D printing action figures

In just 15 minutes (besides the fight I had with our laptops not having a .zip file extractor) I was able to create a 3D action figure using AutoCad's Tinkerplay app for the iPad. That's the easiest part. Tinkerplay, from the makers of Tinkercad, comes with already made parts that anyone can select to build a customized action figure in minutes. Although the options are a bit limited, tinkerplay could be a jumping off point for kids interested in designing their own toys with connectable parts. Once the app is opened,you are brought to a blank plane. The top right corner allows you to select each part. The outer line of the wheel are the available options, while the wheel before displays the location of the part (head, chest, feet, hands).   Once the grey part is selected merely drag it with your finger onto the plane. A simple tap of your finger on the part will bring up deleting or moving options. Once you have built your figure, press the bright

The marriage of art and technology

We finally had our Grand Reveal for our Arduino Garden Wall last Thursday and it was fun seeing the reaction from youth and adults alike. Some found the Garden Wall perplexing, "What is this doing here?" Some found it delightful, "You had youth, an artist, and an engineer working together on this?" Bringing over our Ultimaker2 and having it running a loop of bracelet-making was also a big hit. Because the artwork is on a rolling partition, bringing it up to the Reference floor was not a huge problem. We had made sure there were no delicate wires dragging and no reason why we couldn't fold it up fairly close to get it into the elevator. Because it is so colorful and the visuals Sally Dean created are so delightful, it can hold up to being turned off most of the time and still be a visually pleasant addition to the surroundings. We will keep it in its current location for a few weeks and then move it back against a wall near to the Digital Media Lab where

3D Printing Etsy Store: Empowering Local Crafters

Looking for a fun way to empower the local crafter? Check out Etsy , an internet based shopping website that allows anyone to buy and sell their hand made merchandise. 3D printed materials still count in the "hand made" universe. All you need to do is set up a shop and take pictures of your work. If someone were to print with our $1 an hour charge, they could make earrings for a product cost to them of $1-3 (based on size), use a dremel or small drill to make a hole, and go to Michaels, or another local craft store, for the stainless steel earring hooks and you are in business for profit! (beware of copyright infringement such as printing items from Nintendo, Disney, etc.) This is from Fish3Ddesigns , which prints using a Makerbot Replicator 3D printer in PLA. It sells for $22.00 on Etsy plus shipping. I'd be interested to hear from an Etsy shop owner how good business is but with such a low start up cost it would be worth a try anyway.  Just another way to s