Skip to main content

3D scan and print yourself

Posted by our talented Simmons Graduate School intern, Tyler Kenney:

3D scanning has come to the library, and with it the ability to 3D print yourself.  By using an Xbox 360 Kinect and simply spinning in a chair, you can scan and print a bust of yourself.


To get started, make sure the Kinect is plugged in (into the computer and into the wall) and launch Skanect, which should be located on the iMac's desktop.  With Skanect launched just click 'new' (the default settings will work fine), and then 'start' - shown below:

After clicking 'start' it will bring you to this screen:


Now is when you want to correctly position yourself.  The white box outline shows the area that will be recorded.  Grab the mouse (you will need it later) and position yourself accordingly.  With the mouse on your lap, click the record button (the red button with a black center).  Once it starts recording, stay as still as possible and slowly rotate the chair with your feet 2-3 times.  When you are done rotating, click the button again to stop recording.  It will now mesh the scan together, and once it finishes doing that go to the 'Process' tab.  From there you can use 'Fill Holes' to fill in the gaps and holes that would otherwise make printing your scan impossible.  

As shown below:

After selecting 'Fill Holes', make sure 'Watertight' and 'Very Low' are selected, and then click run.  You can select a higher 'Smoothing' setting if you wish, just know that the more it is smoothed the more detail you will lose.  After filling in the holes and gaps, go to the 'Share' tab and select 'Export Model'.  Export it as an .stl, make sure the 'Scale' is set to millimeters or inches, save it to the desktop, and then you can import it into Tinkercad and clean it up.  Note: the scans will import at an extremely large size, when importing into Tinkercad scale it down to 15-20%.  It can be further scaled down and printed within the Cura software.


Have an Xbox 360 Kinect of your own?
Want to set up your own 3D scanner?

What you need:
Xbox 360 Kinect
360 Kinect AC adapter
Computer
Skanect

For Windows users it is incredibly easy.  Download the Microsoft Kinect SDK 1.8 and the latest version of Skanect.  After that, plug the kinect into the wall and into your computer.  The computer should download the rest of drivers automatically.  Launch Skanect and start scanning.

Mac users will have somewhat trickier time.  The Mac will not automatically download the drivers, and the Microsoft SDK will not work within the Mac operating system.  You can, however, follow online tutorials for setting up drivers that will work.  Tutorials for setting them up can be found here and, under 'Build Intructions', here.  These are instructions for setting up libfreenect, also known as OpenKinect, a set of open source Kinect drivers.  
Alternatively, users can try to set up their Kinect by following this tutorial.  
If libfreenect or the blog post instructions by themselves do not work (Skanect will be unable to detect a scanner/sensor), complete both of them.  The iMac at the library completed both (Mac OS 10.10) and it works.

You may also want to update your GPU drivers, just follow the links from the Skanect site.  
Shown below:


Comments

  1. These techniques can't replace other arts, such as photography can't replace painting
    Custom dolls are created from the beginning of history, it is clear that fighting the hyperrealism is complicated. But that is precisely the magic of craft
    You can order custom puppets and this site
    https://puppetlab.wordpress.com/

    ReplyDelete
  2. wonderful article. Very interesting to read this article. I would like to thank you for the efforts you had made for writing this awesome article. This article resolved my all queries.
    3D Scanning Services Cost

    ReplyDelete
  3. Wonderful article. Exceptionally curiously to read this article. I would like to thank you for the endeavors you had made for composing this amazing article. This article settled my all inquiries. Best as built p&ids Denver, Colorado

    ReplyDelete

Post a Comment

Thanks for commenting!

Popular posts from this blog

Our most popular makerspace/STEM/Library of Things

As of April 2018, we did a kit circulation report.  We had 106 kits which have circulated 1,047 times since it's inception in 2015.  Here is the top 10 list of most circulated. These include hobby kits, puzzles, cake pans, instruments, science robots/STEM, and American Girl dolls. The ukulele kits (we have one soprano and one concert kit) have been around the longest and have circulated 106 times total.  Just remember someone should change the strings yearly and definitely include a tuner (we like the snark) as new strings on a uke take a while to break in. Surprisingly our meditation toolbox comes in second with 51 checkouts.  It is just some CDs and a DVD.  This one has also been around since the inception of our kits. Next up is our virtual reality headset toolbox.  It is a Homido Virtual Reality headset. If that is too pricey, I recommend Google Cardboard.  Our sewing machine comes in 5th.  Knitting is a great idea for a toolbox and very popular but li

New ideas for Circulation-Library of Things/ Makerspace Kits

The DFL currently experiments with hobby, STEAM, and Technology kits that are housed both in the adult section and the kids room. These kits include musical instruments, video equipment, puzzles, cake plans, robots, looms, and more available for checkout.  The kits are bought using our Amazon prime account, under the supervision of the head of circulation using a special makerspace kit budget and backed up by a kit committee made up of various departments to streamline the process.  The kits with the most holds by far have been the Retro Nintendo  and Super Nintendo Classic which were small batch pre-Christmas releases for the last two years.  Rather than blowing the dirt out of your old cartridges, these consoles have games built in for your playing pleasure. According to Walmart, the Nintendo "classics" are on sale as of today.  Our kit contains a small palm sized console, 2 controllers (try to upgrade wireless ones if you can), an ac adapter, and, I recommend, a carr

3D Printing Signs for the Library Collection

Last weekend, I went to the annual Tee-Off mini golf event at the Brookline Public Library.  As a first time visitor, I was mini-golfing with my phone at the ready. Special thanks to the AMAZING librarian rockstar Robin Brenner for so many great ideas. It truly is worth a visit just to see her teen room. Here are a few 3D printing/marketing ideas to takeaway: Having a  3D printer filtration cart would be wonderful in our library.  Look at the price if you dare.  Right now I have to go downstairs to retrieve prints because we are concerned about the fumes and little hands touching anything while the printer is on.  I have a video camera set up downstairs using an iPad 2 and the free app called Presence  for monitoring but sometimes I do forget to keep checking the presence website while I'm on the desk especially since it makes this annoying beeping sound to say, "Are you still watching?!"..As the sign reveals on the cart, the propensity to want to lean or jostle the car